1.) Before preforming synchronization to external USB storage device, please make sure:
a.) the external USB storage device is in FAT32 file format, with minimum 256GB capacity.
b.) the power source is plugged into the UDMA3 device
c.) it must be the USB hard disk. Not an USB thumb drive or flash drive.
2.) Go to Sync from Main Menu, and the screen below will be displayed.
3.) Click at the upper left Menu button for option of Change Source or Change Destination.
4.) In this example, we go to the Change Destination to create a new folder.
5.) Click at the Change Destination > enter Select Folder and a screen with "W" drive letter will be displayed.
"W" drive represents the external USB storage device.
6.) Press the Right button on navigation pad to access the "W" drive.
7.) Press the upper left Menu button again to create Folder.
8.) We're going to name the folder as "ttttt" and then hit the Enter key (in a red circle) to create the folder.
9.) Use the navigation button to select the new folder "ttttt" and then hit center button to confirm it.
10.) Press the Exit button back to the Sync menu, where you see the Path is changed to /W/ttttt
11.) Lastly, hit the Sync to copy all data from UDMA3 to the "ttttt" folder inside the external USB storage device.
Please sign in to leave a comment.