Skip to main content

How to address the low resolution with Nintendo Switch OLED?

Kelvin
  • Updated

1.) Prepare a HDMI monitor or TV and a Windows computer with USB-C port to support display.

2.) Save the "AuxUpdate.exe" and FW file "HYPER_UPDATE_0X02_0X55" attached to a Windows computer and then launch the AuxUpdate application after the monitor screen is cast successfully.

3.) The next screen which is illustrated below will pop up.  Select the graphic card brand in your computer.

mceclip0.png

4.) In the next screen, you will see the windows interface below.  Click at the  "Get Firmware Info" first, and then "Download Firmware" and select the ""HYPER_UPDATE_0X02_0X55".   The progression bar will start running once the update is running.

 

mceclip1.png

5.) Once it is done, click at "Get Firmware Info" and it should show FW are 0x02 and 0X55

 

Related articles

Comments

6 comments

Date Votes
  • Jeffrey Smith

    Is there any other way to update the firmware for this other than with a Windows based computer with an USBC output?  Can you do it from a Macbook?

    0
  • Kelvin

     

    @Jeffrey Smith,  if you run a BootCamp on MacBook, then you can do the FW update on a MacBook.

    https://support.apple.com/en-us/HT201468

    0
  • Jeffrey Smith

    Thanks, but does that mean I'd have to purchase Windows?

    0
  • Kelvin

     

    Jeffrey Smith

     
    It's actually free to install Windows 10 without a license key.  Follow the link I sent to you on how to setup BootCamp on Mac and you're good to go to run the FW update on the HyperDrive Power hub.
    0
  • Jeffrey Smith

    Ok, thanks!  I'll try it out.

    0
  • Nhien Nguyen

    can you help me how can I connect Hyperdrive 60w to PC and what cable can I use for it?

    it had 45w host - 18w - Data - Hdmi ? which port need to connect to PC and when connect it it need to connect to power ? if you have any picture or video to help with it can you send it to me please thank.

    0

Please sign in to leave a comment.