If your Device's USB-C Port does offer Display Output mode, and there no signal on HDMI out of Hyperdrive, please help to check and try the following:
-HDMI has to connect to an HDMI display monitor with HDMI to HDMI cable.
It is not compatible with the DVI/ Display port or other non-HDMI monitors, even with an adapter. You will need an Active Converter that can correctly convert the signal.
-Make sure your Display is set to correct HDMI input source
-Test the HDMI Cable and Monitor/TV/Display to ensure they are also functioning properly.
-Turning off / Reset your USB-C Device, unplug then reconnect the Hyperdrive. Also switch off then unplug the Monitor/TV/Display and try to reset the connections to try again.
-The length of the HDMI cable can not exceed 2 meters.
-Some manufacturers make its cable so that one end has to be connected to a display monitor, and the other end is connected to the source. Normally, the end to display monitor has a "TV" marked on it.
If you continue to have issue with HDMI, please contact us support@hypershop.com and let us know your result with the above suggestions also, so we may help to find a solution quicker.
Comments
0 comments
Please sign in to leave a comment.