STEP 1. Download the firmware file for your iUSBPort Device. (Either as an attachment or through a link, steps should be as shown below)
If you have received a firmware update as an attachment see below. Once downloaded, you will select "Open in iUSBPort"
If the firmware file is downloaded from HyperShop Support Site, see images below on how to open using the iUSBPort App
STEP 2: Once the file has been downloaded and opened in iUSBPort app, you should see a similar view from below.
**FROM THIS POINT ON, YOU WILL HAVE TO BE CONNECTED TO THE IUSBPORT'S WIRELESS NETWORK AND SHOULD BE ABLE TO SEE THE IUSBPORT ON THE APP.
STEP 3: Click 'edit' from the top right corner of the screen to bring out the bullet points next to the files and tap the firmware file to select it.
STEP 4: Once selected, tap on the action button on the lower left corner of the right side panel and select 'copy'
STEP 5: Select the iUSBPort under the left panel of the screen and tap on "C" to access the remote storage.
STEP 6: Once you are within "C" press the action button once again but this time select "Paste" (A status window will show up showing you the status of the transfer)
STEP 7: Once the transfer is complete, reboot the iUSBPort device. You will see a different behavior of the lights while booting up which means the update is in progress. The iUSBPort will shut down automatically which means that the update has been completed.