Please note: The Micro SD card does not go all the way in, it is only half way. If the Micro SD card is push inside the hub accidentally, please follow the instruction below to get the memory card out from the hub.
1.) Prepare a precision Torx screwdriver in 0.8 size
2.) Unscrew the outer bezel on each side.
3.) Use a flat-tip screwdriver to push out the outer bezel on each side slowly and carefully.
4.) When the outer bezel is separated from casing, remove the whole pice of logic board from casing slowly to retrieve your memory card.
5.) Do the reversed steps to put back the circuit board and outer bezel to the casing.
Comments
0 comments
Please sign in to leave a comment.