posted this on July 02, 2013 22:49
Fix directory display bug in iUSBport app v1.6
Web app addresses "TOKEN NOT FOUND" when syncing with Dropbox
Addresses inability to configure infra mode settings after V23 update
Beta Support for PTP (Picture Transfer Protocol).
Built-in installer for customized apps.
CloudFTP auto shutdown if it is not connected to any client for a specified
amount of time (5/15/30/60/120 mins).
User can toggle between ad-hoc mode and infrastructure mode by tapping the power button once when CloudFTP is scanning for wireless
router during startup (when LCD is showing "Scanning"
Ability to create ad-hoc network without password.
Ability to join existing networks with hidden SSID.
When connected to existing networks in infrastructure mode, CloudFTP will constantly monitor and display connection quality symbol on
the LCD screen.
There is no download link, the firmware v29 file name "WD7START.SEF" is attached. Please copy it into the USB flash drive and insert it to the unit to proceed firmware update.
During process of upgrade from V25 to V29 I have following message : Update Fail! Too Fat
I am using standard 2GB storage device. What is the problem?
Please make sure the file name is same as "WD7START.SEF" I would suggest you to reformat the 2GB USB flash drive and do it again.
WHERE IS download link? What a sense to give firmware update list w/o possibilities to DL it.
The firmware v30 file "WD7START.SEF" is attached in the link, just save it into a USB flash drive and keep the file name as it is.
How about finally suppoerting a 4TB drive with v31 ?
Also: How is that iUSBPort2 coming along ?
Link finnally worked... Hope I can now use my port with myiPAD
To Steve Tester,
Please refer the instruction link below "How to Update firmware without computer?"
To Pascal Braig,
The iUSBport support up to 2TB only (it's internal hardware limitation)
Please call in 1.888.202.1888 for detail about the iUSBport2
What about select a <a href="http://www.ikinkoo.com/shop/portable-charger/kinkoo-infinite-one-80... charger</a>
what about Kinkoo http://www.ikinkoo.com/shop/portable-charger/kinkoo-infinite-one-8000mah.html
after i updated my iusb port from v29 to v30, my goodplayer is not reading files on my atached hard to iusb port..??
where can i find the v29 link to downgrade it?
actually it works on i phone..just not on ipad..
Hi Andrius, please send email to firstname.lastname@example.org for the v29 firmware.
All version including v30 are bugged! I have iPad 4 ios 7.0.4 and I have to reboot iUSBport because every time I watchin my damn movies using whatever player it stops stream, stops http and other servers (timeout). I am really upset of this bugged firmwares!
v30: Additional info: when video stream stops and I am trying open the http://192.168.0.1 it says wifi media kit stopped, please reset it!.
With V29 I could connect via web browser via http://iusb or http://192.168.0.X or GoodReader with ftp://iusb.... but with V30 I can no longer use the name but only the numerical IP address. Did something change?
as a funder of the kickstarter for this device, i am DISGUSTED. the V30 firmware FIXED NOTHING. i can't even connect to my cloudftp anymore. i get the ridiculous "WiFi media kit stopped to working" error.
v29 had issues with iOS v7 so i updated to v30 and now it is completely and hopelessly broken.
is there an ETA for v31 so i can try that? (not that i have any hope that it will actually solve anything...)
the error "WiFi media kit stopped to working" is not because the issue from iUSBport. It's most likely the WiFi on iPad has to changed to recpnnect to the previous WiFi network. Please check the WiFi setting on iPad.
The v30 does fix the issue of WiFi connection in iOS7 without going to the Login white page.
To Dennis and Dave Mac
The firmware version v29 for iUSBport can be downloaded at:
Regarding the issue with v30, please try the following suggestion:
1.) On the iPad/iPhone WiFi, select Forget the "iUSBport"
2.) Clear the Safari cookies and history
3.) and reboot the iPad/iPhone.
I tried the 3 step process you recommended. It had mixed results. First I forgot the iUSBport network, cleared Safari's data and rebooted. Then I connected a Western Digital My Passport drive (1TB WDBACX0010BBK-01) which worked perfectly fine before the V30 firmware was applied. This drive is no longer seen by the iUSBport device. I can connect via WiFi to the iUSBport and use Safari to connect. But I do not see the hard drive at all.
I then switched to a 1.5 TB Seagate FreeAgent GoFlex. This drive was seen by the iUSBport but when you connect via Safari you get a completely wonky display. Screenshots of this ugly mess are attached...
This is maddening. The MyPassport drive ALWAYS WORKED! I was only able to use the 1.5TB GoFlex after I updated the firmware long ago (when it was still called CloudFTP)
So I downgraded to V29 and found that my ability to read the MyPassport drive was broken in V29. (but the display was no longer wonky like you see in the 2 attached photos...)
I then booted the iUSBport and plugged in the 1.5TB GoFlex. The iUSBport saw the drive and I could interact with the files but I had the completely wonky display as seen in the attached screenshots.
At this point, I am sorry I even own this thing. It started off with real promise but the firmware updates are not delivering that promise.
The header of the WD7START.SEF file uploaded here is WD70030 20131025, so, I guess it is V30.My iUSBPort reports V29:20130328 162607
When I tried to upgrade the FW - nothing happened, although cloudftp.app was installed OK.
So, what is the reason iUSB did not recognize the FW?
Support Software by Zendesk